How to calculate the square footage of a wardrobe
When decorating or customizing furniture, calculating the square footage of a wardrobe is a skill that owners and designers must master. Whether it's for budget planning or material purchasing, it's crucial to accurately calculate your closet area. This article will introduce the square calculation method of wardrobe in detail and provide structured data for reference.
1. Basic method for calculating wardrobe area
The square footage of a wardrobe is usually calculated in two ways:projected area methodandexpanded area method. Here is a comparison of the two methods:
| Calculation method | formula | Applicable scenarios | Advantages and Disadvantages |
|---|---|---|---|
| projected area method | length×height | Quick quotation, simple cabinet | Calculation is simple, but internal structure may be ignored |
| expanded area method | The total area of all panels | Complex customization, precise budgeting | Accurate results but complex calculations |
2. Detailed explanation of projected area method
Projected area is the most commonly used calculation method and is suitable for standard rectangular wardrobes. The specific steps are as follows:
1. Measure the wardrobeFrame length(maximum size from left to right)
2. Measure the wardrobeFrame height(Maximum dimension from floor to top)
3. Multiply the two values to get the projected area
For example: a wardrobe 2 meters long and 2.4 meters high has a projected area of 2×2.4=4.8 square meters
3. Detailed explanation of expanded area method
The expanded area method requires calculating the sum of the areas of all panels used, and is suitable for wardrobes with complex structures. Mainly includes the following parts:
| components | Calculation method | Example (2m long × 0.6m deep × 2.4m high) |
|---|---|---|
| Side panels | Height × Depth × 2 blocks | 2.4×0.6×2=2.88㎡ |
| Top and bottom plate | Length×Depth×2 blocks | 2×0.6×2=2.4㎡ |
| backplane | length×height | 2×2.4=4.8㎡ |
| Shelves/door panels | Calculated according to actual quantity | Depends on specific design |
4. Frequently Asked Questions
Q: How to calculate the area of a corner wardrobe?
A: It is recommended to use the expanded area method for the corner wardrobe. Calculate the two cabinets separately, add them together, and then subtract the area of the overlapping part.
Q: How to calculate the wardrobe with drawers?
A: The drawer part should be calculated separately: the drawer panel is included in the projected area, and the internal structure is included in the expanded area.
Q: Are wardrobe doors calculated separately?
A: It depends on the material: swing doors are generally included in the projected area; sliding doors may need to calculate the door body area separately.
5. Calculation precautions
1. When measuring, consider the unevenness of the wall and leave a 1-2cm margin.
2. It is recommended that special-shaped cabinets be decomposed into multiple standard geometric shapes for calculation
3. Decorative parts such as door frames and baseboards are generally not included in the calculation.
4. Hardware, slide rails and other accessories are usually priced on a piece-by-piece basis and are not included in the square footage.
6. Reference to the latest market conditions
| Material type | Unit price range (yuan/㎡) | Applicable scenarios |
|---|---|---|
| density board | 80-150 | Economical wardrobe |
| solid wood particle board | 120-220 | Mainstream choice |
| multilayer solid wood | 200-350 | High-end customization |
| Pure solid wood | 400-800 | luxury level |
Through the above detailed analysis, I believe you have mastered the calculation method of wardrobe square number. It is recommended to review all dimensional data with the designer before placing an official order to ensure that the calculations are accurate.
check the details
check the details
en
