Welcome to visit Taroshui!
Current location:front page >> car

How to check the inside of a tire

2026-01-01 19:44:26 car

How to check the inside of a tire

As the only part of the vehicle in contact with the ground, the safety of tires is directly related to driving safety. In addition to regular tread inspection, inspection of the inside of the tire is equally important, but is often overlooked by car owners. This article will introduce in detail the inspection methods, common problems and treatment suggestions on the inside of the tire to help car owners fully understand the health of the tire.

1. Why should we check the inside of tires?

How to check the inside of a tire

Due to its hidden location, the inside of the tire is easily overlooked during daily inspections. However, problems such as inner wear, cracks or bulges can also cause a blowout. In particular, medial inspection is more important if:

1. The vehicle has experienced severe bumps or impacts
2. The tire has been repaired or replaced
3. Reuse the vehicle after being parked for a long time
4. Found the vehicle deviating or shaking

2. Inspection steps for the inside of the tire

1.Preparation: Make sure the vehicle is parked on flat ground, apply the handbrake, and use a jack to lift the vehicle if necessary.

2.Check tool: Flashlight, tire pressure gauge, gloves, marker (for marking problem locations).

3.Check process:

Check itemsHow to operatenormal state
Inner tread wearTouch the inner tread with your hand to see if the wear is even.Even wear, no abnormal dents
Sidewall conditionShine a flashlight to see if there are any cracks or bulgesSidewalls are smooth with no bulges or cracks
Foreign body inspectionCheck carefully to see if nails or other sharp objects are inserted into theNo foreign matter embedded
Valve checkCheck whether the valve is leaking or agingThe valve is in good condition and there is no air leakage

3. Common problems and solutions

Question typePossible reasonsHandling suggestions
Severe wear on the insideInaccurate four-wheel alignment and suspension system failureImmediately do a four-wheel alignment and check the suspension
Sidewall bulgeCord layer breakReplace the tires immediately and do not continue to use them.
Inside crackAging and long-term low-pressure drivingDetermine whether to repair or replace based on the depth of the crack
Foreign body penetrationA sharp object struck while drivingProfessional repair or replacement (depending on the location of the damage)

4. Professional inspection suggestions

1.Regular inspection: It is recommended to inspect the inside of the tires every 5,000 kilometers or 3 months.

2.Professional equipment: Use a tire changer to more thoroughly inspect the condition of the inside.

3.Maintenance tips: Always check the inside when rotating your tires, this is the best time to spot potential problems.

5. Preventive measures

1. Maintain appropriate tire pressure (refer to vehicle manual)
2. Avoid long-term high-speed driving
3. Regularly perform four-wheel alignment and dynamic balancing
4. Avoid overloading
5. When parking, avoid pressing the curb with the side of the tire.

6. Latest tire technology trends

According to recent industry reports, tire technology will have the following new trends in 2023:

Technical nameFeaturesImpact on medial inspection
Self-healing technologyBuilt-in sealant automatically repairs small holesPay attention to the condition of the sealant during inspection
Intelligent tire pressure monitoringReal-time monitoring of tire internal conditionsCan help find internal problems
Environmentally friendly materialsMore resistant to aging but hardness may be reducedNeed to pay more attention to inner wear

Conclusion

Inspection of the inside of tires is a step that cannot be ignored in vehicle maintenance. Through regular and comprehensive inspections, potential problems can be discovered early and potential driving safety hazards can be avoided. It is recommended that car owners develop good inspection habits and seek help from professional technicians when necessary to ensure driving safety.

Next article
  • How to look at the wide front and narrow back: analysis of hot topics on the Internet in the past 10 daysRecently, a large number of hot topics have emerged on social platforms and news media, ranging from international situations to entertainment gossip, from technological breakthroughs to social phenomena, showing the communication characteristics of "wide at the front and narrow at the back". This article will sor
    2026-01-29 car
  • How to sell used cars efficiently: hot spots and practical tips across the InternetRecently, the second-hand car trading market has continued to heat up. Based on the hot topics and user concerns on the Internet in the past 10 days, we have compiled a systematic second-hand car sales strategy. This article will focus onMarket trends, pricing techniques, marketing channelsThe three core modules are expanded and struct
    2026-01-26 car
  • How to affix temporary car plates? Popular topics and practical guides on the Internet in the past 10 daysRecently, the standards for affixing temporary vehicle license plates have become a hot topic on the Internet. Especially with the detailed interpretation of new traffic regulations, car owners' demand for the compliant use of temporary license plates has surged. The following is a structured guide compiled based
    2026-01-24 car
  • How to install the license plate frameA license plate holder is an essential accessory on your vehicle, and proper installation not only ensures compliance but also protects your license plate from damage. The following is a detailed guide on the installation of license plate racks that has been a hot topic on the Internet in the past 10 days. It combines structured data and step-by-step instructions to help you comp
    2026-01-21 car
Recommended articles
Reading rankings
Friendly links
Dividing line