What should I do if the floor heating is frozen? Summary of popular solutions across the network in the past 10 days
Cold waves have occurred frequently recently, and temperatures have plummeted in many places. Many users have reported that the floor heating pipes in their homes have frozen, causing heating failure. This article combines the hot discussions and technical guides on the Internet in the past 10 days to sort out practical solutions for preventing and thawing floor heating to help you quickly solve the problem.
1. Common causes of floor heating freezing

| Reason type | Specific performance | Frequency of occurrence (last 10 days) |
|---|---|---|
| Low temperature is not turned on | Pipes that have not been used for a long time and have not been drained | 38% |
| Poor pipe insulation | Exterior wall pipes without insulation | 25% |
| cycle failure | Water pump stalls causing localized freezing | 17% |
| Equipment aging | Seal failure of water distributor and water leakage | 12% |
| Others | Thermostat failure, etc. | 8% |
2. Emergency thawing operation guide
According to popular maintenance bloggers on Douyin, Xiaohongshu and other platforms, the following step-by-step operations are recommended:
| steps | Operation content | Things to note |
|---|---|---|
| 1. Shut down the system | Cut off power/close gas valve | Prevent equipment from dry burning during thawing |
| 2. Local heating | Hair dryer baking water separator (keep 30cm distance) | Avoid high temperature burns on pipes |
| 3.Slowly heat up | Air conditioning assists in raising room temperature to above 15°C | The temperature rise does not exceed 5℃ every day |
| 4. Pressure detection | After thawing, check whether the pressure gauge is ≥1.5Bar | If the pressure is lower than the standard, supplementary pressure is required |
| 5. Trial run | Turn on floor heating and observe for 24 hours | Focus on checking whether there are leaks |
3. Six key measures to prevent freezing
The Baidu Index shows that the search volume for "floor heating and antifreeze" increased by 240% from the previous month. These methods have been repeatedly proven to be effective:
1.short term outing: Keep the floor heating running at low temperature (set to 18℃)
2.Long term idle: Use an air pump to purge the water in the pipes (requires professional operation)
3.Pipeline upgrade: Install electric heating tape (power consumption is about 5W/meter/day)
4.Intelligent monitoring: Install a temperature and humidity sensor (the alarm threshold is recommended to be ≤5℃)
5.Door and window sealing: Replacing broken bridge aluminum windows can increase room temperature by 3-5℃
6.Regular maintenance: Clean the filter every year before heating (clogging rate exceeding 60% affects circulation)
4. Comparison of antifreeze solutions for different house types
| House type | high risk link | Recommended plan | cost estimate |
|---|---|---|---|
| Old community | Exposed exterior pipes | Rubber and plastic insulation tube + aluminum foil tape wrapping | 15-20 yuan/meter |
| villa | basement plumbing | Self-limiting temperature electric heating tape + thermostat | 80-120 yuan/㎡ |
| Newly decorated house | Divider location | Pre-installed anti-freeze water distributor (with drain valve) | 30% more expensive but lifetime frost protection |
5. Professional service data reference
According to Meituan service data statistics, floor heating repair orders in the past 10 days have the following characteristics:
| Service type | average quote | response time | Positive rating |
|---|---|---|---|
| Emergency defrost | 300-500 yuan | Within 2 hours | 92% |
| Pipe replacement | 1500-3000 yuan | Reservation required | 88% |
| System transformation | Starting from 8,000 yuan | 3-7 days | 95% |
Special reminder:If you find that a pipe has frozen and cracked and water is leaking, you should immediately close the main valve and contact your insurance company (most home insurance covers pipe freezing and cracking claims). Heating issues in winter are related to home safety. It is recommended to establish a regular inspection system to nip problems in the bud.
check the details
check the details